10/100 Fast Ethernet Cardbus Adapter

◎Features:

☆ Dongle-less design that integrates RJ45 connector into the PC card.
☆ PC card standard 68 pin 32 bit CardBus interface.
☆ Supports auto-negotiation for 10/100Mbps network speed and full/half duplex type.
☆ Built-in 4K bytes RAM data buffers.
☆ Supports easy to read diagnostic LED indicators.
☆ Hot swap card insertion and removal.
☆ Plug-and Play design without switch or jumper settings.
☆ Works with a wide range of leading notebook computers.
☆ Low power consumption.
☆ Supported drivers:
-Microsoft Win95/98/98SE,Win2000,WinNT v3.51,4.0,NDIS2.0 for Lan.
-Manager,Packet driver for NCSA,Packet driver for Winsock,Novell.
-NetWare DOS ODI driver,NetWare Server v3.12,NetWare Server v.4.x,Linux.

◎Specification

Standard

IEEE 802.3 10Base-T,802.3u 100Base-TX PCMCIA
2.x,32 bit CardBus

Protocol CSMA/CD

Data rate Ethernet:10Mbps (half-duplex),20Mbps(full-duplex)
Fast Ethernet:100Mbps (half-duplex),200Mbps(full-duplex)

Connector -Shielded RJ45
-PC Card standard 68pin connector to PC

Cable 10Mbps:UTP CAT.3,4,5 cable(100m max.)
100Mbps:UTP CAT.5 cable(100m max.)

LEDs 10Mbps:Link/Activity
100Mbps:Link/Activity

Environment Temperature:0°C to 40°C
Relative humidity:10% to 90% non-condensing

Dimension 120×54×15mm(4.72×2.13×0.59 inch)

Ordering Information

Item No

Description

AD-PF-32I 10/100Mbps 32bit Cardbus Adapter

[ ][Print this pag

Cabling System Manufacturer and a Cabling Solution Provider