Category 7 Cable

◎ Application:155MbpsATM、 622MbpsATM、1000Base-T、10GBase-T.

◎ Standard:According with the standard of IEC61156-5 CAT 7 and EN50288-4-1.

◎Cat7 Cable Construction Matrix:

	STP	SFTP
Conductor	22/23AWG Solid Plain Copper	22/23AWG Solid Plain Copper
Insulation	Polyethylene	Polyethylene
Screen	Individual Aluminum Screen	Individual Aluminum Screen+Copper Wire Braid
Drain Wire	7/0.2mm	NIL
Outer Sheath	PVC/LSOH	PVC/LSOH

◎Frequency: 1-600MHz(common standard) 1-1000MHz(cat7E standard)
◎ General Characteristics:
☆ Characteristic Impedance:100±15Ω (1-600MHZ).
☆ Nominal Velocity of Propagation:79%.
☆ Maxmium Mutual Capacitance:5.6nF/100m.
☆ Maximium DC Resistance: 22#:5.9Ω /100m 23#:7.5Ω /100m.
☆ Maxmium Resistance Unbalance:5%.
☆ Maxmium Propagation Delay Skew:30ns/100m.
☆ Maxmium Propagation Delay:536ns/100m@100MHz.
☆ Voltage Rating :60Vrms.
☆ Maximum Pulling Load:80N.
☆ Working Temperature:（-20）℃—（+60）℃.
☆ Storage Temperature:（-5）℃—（+50）℃.
☆ Flame Retardancy:IEC332-1(FRRVC&LSOH jacket)
　 IEC332-1&IEC332-3C(LSFROH jacket).
◎Cat 7 Cable Parameters:

Construction	Coductor Diameter /mm	Diameter over Insulation /mm	Pairs	Screen	Overall Diameter /mm	Outer Sheath
SFTP	0.57/0.64	1.02	4	Individual Aluminum Screen+Copper Wire Braid	8/9.1	PVC/LSOH
SFTP	0.57/0.64	1.02	4	Individual Aluminum Screen+Copper Wire Braid	8.5/9.5	LSFROH
STP	0.57/0.64	1.02	4	Individual Aluminium Screen	8/9.1	PVC/LSOH
STP	0.57/0.64	1.02	4	Individual Aluminium Screen	8.5/9.5	LSFROH

◎Transmission Parameters:

FREQ (MHZ)	NEXT (db/100m) Minimum Value/Typical Value/Standard Value ≥	ATTENUATION (db/100m) ≤	RETURN LOSS (db) Minimum Value/Typical Value/Standard Value ≥	PPACR (db/100m) Minimum Value/Typical Value/Standard Value ≥
1	90.0/100.0/80.0	2.0	20.0/23.0/20.0	88.0/98.0/80.0
4	90.0/100.0/80.0	3.6	23.0/26.0/23.0	86.4/96.0/76.4
10	90.0/100.0/80.0	5.7	25.0/28.0/25.0	84.3/94.0/74.3
16	90.0/100.0/80.0	7.2	25.0/28.0/25.0	83.3/92.0/72.8
20	90.0/100.0/80.0	8.1	25.0/28.0/25.0	82.5/91.0/71.9
31.25	90.0/100.0/80.0	10.1	23.6/26.0/23.6	80.0/90.0/69.9
62.5	90.0/100.0/75.5	14.5	21.5/24.0/21.5	76.0/85.0/61.0
100	90.0/100.0/72.4	18.5	20.1/23.0/20.1	72.5/75.0/53.9
200	90.0/100.0/67.9	26.8	18.0/23.0/18.0	65.0/70.0/41.1
250	95.0/90.0/66.5	30.2	17.3/23.0/17.3	50.0/58.0/36.3
300	95.0/90.0/65.3	33.3	17.3/23.0/17.3	59.0/55.0/32.0
600	80.0/90.0/60.8	48.9	17.3/20.0/17.3	32.0/50.0/11.9

FREQ (MHZ)	PPELFEXT (db/100m) Minimum Value/Typical Value/Standard Value ≥	PSNEXT (db/100m) Minimum Value/Typical Value/Standard Value ≥	PSACR (db/100m) Minimum Value/Typical Value/Standard Value ≥	PSELFEXT (db/100m) Minimum Value/Typical Value/Standard Value ≥
1	85.0/90.0/80.0	87.0/97.0/77.0	85.0/95.0/75.0	82.0/87.0/77.0
4	85.0/90.0/80.0	87.0/97.0/77.0	83.4/93.0/73.4	82.0/87.0/77.0
10	79.0/90.0/74.0	87.0/97.0/77.0	81.3/91.0/71.3	76.0/87.0/71.0
16	74.9/90.0/69.9	87.0/97.0/77.0	80.3/89.0/69.8	71.9/87.0/66.9
20	73.0/90.0/68.0	87.0/97.0/77.0	79.5/88.0/68.9	70.0/87.0/65.0
31.25	69.1/90.0/64.1	87.0/97.0/77.0	77.0/87.0/66.9	66.1/87.0/61.1
62.5	63.1/85.0/58.1	80.0/97.0/72.5	73.0/82.0/58.0	60.1/82.0/55.1
100	59.0/80.0/54.0	87.0/97.0/69.4	69.5/72.0/50.9	56.0/77.0/51.0
200	53.0/75.0/78.0	87.0/97.0/64.9	62.0/67.0/38.1	50.0/72.0/45.0
250	51.0/70.0/46.0	92.0/87.0/63.5	47.0/55.0/33.3	48.0/67.0/43.0
300	49.5/66.0/44.5	92.0/87.0/63.3	56.0/52.0/29.0	46.5/63.0/41.5
600	43.4/60.0/38.4	77.0/87.0/57.8	29.0/47.0/8.9	40.4/57.0/35.4

◎Cat7 Cable Ordering Information :

Part No.	Description
AD-BC-CAT7STP4PCM22	STP Cat7 22AWG 4Pairs,CM Grade(Non-Plenum )
AD-BC-CAT7STP4PCM23	STP Cat7 23AWG 4Pairs,CM Grade(Non-Plenum )
AD-BC-CAT7SFTP4PCM22	SFTP Cat7 22AWG 4Pairs,CM Grade(Non-Plenum )
AD-BC-CAT7SFTP4PCM23	SFTP Cat7 23AWG 4Pairs,CM Grade(Non-Plenum )
AD-BC-CAT7STP4PLH22	STP Cat7 22AWG 4Pairs,LSOH Grade(IEC332-1)
AD-BC-CAT7STP4PLH23	STP Cat7 23AWG 4Pairs,LSOH Grade(IEC332-1)
AD-BC-CAT7SFTP4PLH22	SFTP Cat7 22AWG 4Pairs,LSOH Grade(IEC332-1)
AD-BC-CAT7SFTP4PLH23	SFTP Cat7 23AWG 4Pairs,LSOH Grade(IEC332-1)
AD-BC-CAT7SFTP4PFRLH22	SFTP Cat7 22AWG 4Pairs,LSFROH Grade(IEC332-1&IEC332-3C)
AD-BC-CAT7SFTP4PFRLH23	SFTP Cat7 23AWG 4Pairs,LSFROH Grade(IEC332-1&IEC332-3C)

★Remark:
* CMR/CMP flame jacket can be offered according to customer request.
** Worst Values refer to the worst values measured in all the four pairs. Typical Values refer to average values taken from all the measurements for any pairs. Standard Values refer to the values as stipulated in the TIA/EIA standard. Typical Values are those margins that may likely be achieved during a normal testing. Worst Values are the margin taken from the worst pairs, which is the lowest margin that can be guaranteed for the cable. Usually, a typical measurement will have a better values than the Worst Value.

　　　　　　　　　　　　　 [ ][Print this page]

Cabling System Manufacturer and a Cabling Solution Provider