FRM-300 Series

☆ The FRM-300 series is a standard 3U Media converter rack that features 16 cards capability with options for redundant power and SNMP management.
☆ Ethernet to fiber converters are available for 10/100Base(auto) over multi-mode fibers (up to 2Km),single-mode fibers(up to 120KM) or utilizing WDM(UP TO 20km).

◎FRM-300 Features:(for frm-300 series-line card type)

A:6 diagnostic LEDs display
☆ PWR ¡¡: Power on (light) or SNMP active (flash)
☆ U/100 : 100M active (light) or 10M active (off)
☆ F/Full: Fx port with Full Duplex (light) or Half Duplex (off)
☆ U/Full: UTP port with Full Duplex (light) or Half Duplex (off)
☆ F/Link: Fx port link success (light) or fail (off)
☆ U/Link: UTP port link success (light) or fail (off)

B:2 DIP switch setting
☆ SW1 : Fx port Duplex setting
☆ SW2 : Loop-back test function setting
☆ *When SW2 is on,the front panel LED will display (flashing) the remote CPE unit status.

Item No:	Description
FRM-300-Chassis	Rack-Mount chassis for both AC & DC type

◎POWER CARDS

Item No:	Description
FRM-300-AC(58283410)	Single AC power plug-in module
FRM-300-DC(58283420)	Single DC-48V power plug-in module

◎OPTIONAL SNMP CARD

A:FRM-300-SNMP
☆SNMP plug-in card & MIB file and manual
B:FRM-300-A:
☆ FIBER TYPE
☆ S:Single Mode
☆ M:Multi-Mode
☆ W:WDM
C:FRM-300-BB:
☆ CONNECTOR TYPE
☆ ST:ST/PC
☆ SC:SC/PC
D:FRM-300-CCC:
☆ DISTANCE CONNECTIVITY
☆ 002 :20Km (Multi-mode only)
☆ 030 :30Km
☆ 050 :50Km
☆ 120 :120Km
E:FRM-300-F:
☆ OPTIONAL FUNCTION
☆ Link-loss forwarding
☆ Loop-back test
☆ Remote monitor status
☆ Two frame lengths
F:Example:
FRM300-10/100S/ST030F
☆ Single mode
☆ ST type connector
☆ 30Km with optional

[ ][Print this page]

Cabling System Manufacturer and a Cabling Solution Provider