10Mbps Fiber converter

◎Features:

☆ AD-FET-104 is an Ethernet/IEEE 802.3 media converter from 10Base-T to 10Base-FL.
☆ Standard:IEEE 802.3 10Base-T and 10Base-FL

◎Physical Specifications

A:
☆ UTP Ports:MPR, DTE.
☆ Fiber Port :FET - 104SC ¡¡¡¡(Multi-mode).
☆ FET - 104ST (Multi-mode).
☆ FET - 104STS (Single-mode).
B: Cable
☆ UTP:Cat.3 or 5 TP cable.
☆ Fiber: 50/125, 62.5/125, 9/125 or 100/140µm multi-mode.
☆ 8.3/125, 8.7/125, 9/125 or 10/125µm single-mode.
C: Ambient Temperature:0°C to 50°C
D:Humidity: 50% to 90%
E:Cable Connection Parameters:TP-ST/SC Cable Limitations
F:Size: 95mm(L)*70.5mm(W)*26mm(H)

Fiber Half/ Full-DuplexMulti-mode:2Km

Fiber Half/ Full-DuplexSingle-mode:10Km

TP Half/Full-DuplexCat.3 or 5: 100m

◎Electrical Specifications

☆ Data Transfer Rate:100Mbps at Half duplex 20Mbps at Full duplex
☆ Power Requirement: 1A@+5V
☆ LED Indicators:Fiber Link, Fiber Activity, Power, TP Link and TP Activity.

◎Applications

☆ Standard: IEEE 802.3 10Base-T and 10Base FL

◎Ordering information

Item No	Description
AD-104ST	Ethernet 10Base-T/FL Converter,SC Multi - Mode
AD-104SC	Ethernet 10Base-T/FL Converter,ST Multi - Mode
AD-104SC	Ethernet 10Base-T/FL Converter,ST Single - Mode

[ ][Print this page]

Cabling System Manufacturer and a Cabling Solution Provider