| |
10/100 Mbps-WDM Fiber converter
◎Features
☆ Complies with IEE802.3u 10Base-TX and 100Base-FX
standards.
☆ Utilizes WDM technology to provide TX and RX
on a single fiber cable.
☆ Fiber connectivity up to 120km for single -mode.
☆ ST or SC connector can accommodate single-mode size
of 9/125um.
☆ Full-duplex,Half-duplex or auto selectable.When auto-negotiation
is selected,these units will automatically tailor themselves to convert
both half-duplex and full-duplex signats,depending on your specific network
needs.
☆ Two RJ-45 for straight or cross-over connection.
☆ 6 diagnostic LEDs.
☆ LFA,Link Failure Alert Function. Link LED will be off when the
link for the fibre or UTP cable is down at any end. It serves as a economic
means of network managment.
☆ Size :95mm(L)*71mm(W)*26mm(H)(external power supply).
135mm(L)*85mm(W)*26mm(H)(internal power supply).
◎Ordering Information:
Item No |
Description |
AD-FET-108WL-SC20A |
10/100Base-T to WDM fiber converter,single
mode,LFA,SC connector,20Km(Matches with AD-FET-108WL-SC20A) |
AD-FET-108WL-SC20B |
10/100Base-T to WDM fiber converter,single
mode,LFA,SC connector,20Km(Matches with AD-FET-108WL-SC20B) |
[
][Print this page]
|
|
