| |
Fast Ethernet Fiber Converter
FEH-106MT-RJ
Fast Ethernet 100Base-TX to Fiber 100Base-FX Converter,MT-RJ,Multi
mode.
AD-FET-106MTRJ is fast Ethernet 100Base-TX to Fiber 100Base-FX Converter,
it features one fiber port using,MT-RJ Connector and one STP RJ45 100Base-TX
port.It supports conversion of Fast Ethernet 100Base-TX port to fiber
optic cabling.
Technical Specifications
1) Standards:IEEE802.3U Fast Ethernet 100Base-TX and
100Base-FX
2) Data Transfer Rate:100Mbps
3) LED:PWR,FDX,FX Link,FX Act,TX Link,TX Act
4) Dimension:26(H)กม71(W)กม97(D)mm
5) Cable:
UTP: Cat.5 UTP cable
Fiber: 50/125,62.5/125.100/140m multi-mode
8.3/125,8.7/125.9/125,10/125m single-mode
6) UTP Cable Limitations:
Half duplex: 1m(up to 100m,subject to fiber length)
Fiber: 50/125,62.5/125,100/140m multi-mode
7) Fiber cable Limitations:
100Base-TX/FX(multi-mode)network allows 512-bit
time delay between any two nodes in a collision domain
8) Connecting to (Full/Half-duplex) Cable Limitations:
| |
Node to Hub:2Km
Hub to Hub :2Km
|
Full-duplex(single-mode) |
Node to Hub:20/40/60Km
Hub to Hub :20/40/60Km |
Full-duplex(multi-mode) |
Node to Hub:412m
Hub to Hub :412m |
Point-Point(No Hub) fiber Cable Limitations:
| |
|
Full-duplex(single-mode) |
Node to Node:20/40/60Km |
Full-duplex MT-RJ & VF-45(single-mode) |
Node to Node:15Km |
Ordering Information
|
|
AD-FET-106MTRJ |
100Base-TX to 1000Base-FX,Fiber Connector |
|
|
