Fibre Patch Cord

◎ Product characteristics :

☆ Using precise ceramic ferrule with smaller inner core diameter and lower concentricity, lower insertion loss and better return loss can be achieved, thus preventing degrade in transmission performance or damage to the transceivers.
☆ Using advance polishing technology, apex offset, fiber height and radius of curvature can be strictly controlled to ensure full compliancy with the standard .
☆ Besides testing the insertion loss and back reflection of the connectors, to ensure product quality, interferometer will be used to measure the surface topology of the connectors for obtaining the values on the endface geometry which includes the radius of curvature, apex offset, spherical undercut/protrusion of the FC, ST, SC, LC and MU connectors.
☆ Every patch cord is optically tested to be guaranteed for good polishing and good performance
☆ Simplex, duplex or multicore fibre cords can be offered. PVC or LSOH jacket with different fire performance grade can also be offered, allowing more flexibility .
☆ Insertion Loss , High Return Loss , good interoperability and good durability for ease of installation.
☆ Exceeds ANSI/TIA/EIA and ISO/IEC requirements for aging, exposure to humidity, temperature extremes, impact, vibration, coupling strength and cable resistance to stress and strain
☆ Compliant with Environmental Testing according to Telcordia standard.
☆ Compliant with JIS,IEC,Bellcore Standard.

◎ Product Specifications :

☆ Fiber Type: Single Mode or Multimode Fiber ( 50/125µm or 62.5/ 125µm ) for selection.
☆ Construction: Simplex, Duplex, Ribbon Fiber, 4 core, 6 core, 8 core, 12 core Fan Out Fiber Cords for selection.
☆ Standard and miniature connector for selection .
☆ Cable Jacket : PVC/ FRPVC/ LSOH for selection.
☆ Connector Type: ST ? SC ? FC ? SMA ? MU ? FDDI ? ESCON ? MTRJ ? LC ? D4 ? E2000 for selection ?
☆ FC ? SC ? ST ? LC ? MU connectors available in PC ? UPC ? APC version for selection.
☆ Compliant with TIA/EIA-568 ? IEC 874-1 standard
☆ Suitable for LAN, Optical System, Fibre to Home, CCTV , Fibre sensor, Fibre CATV, CATV, Testing equipment.

◎Physical/Electrical Specifications:

☆ Cladding Diameter: 125 µm.
☆ Core Diameter: 50/62.5 µm (multimode), 9 µm (single-mode).
☆ Minimum Bend Radius: 10 x total diameter.
☆ Attenuation: For Multimode<3.75 dB/Km at 850 nm; <1.5 dB at 1,300 nm ;
☆ For Single Mode <0.4 dB/Km at 1,310 nm; <0.3 dB at 1,550 nm.
☆ Bandwidth: 200 MHz/km at 850 nm; 600 MHz at 1,300 nm.
☆ Insertion Loss: <0.34 dB Typical; <0.15 dB Single Mode; <0.3 dB Multimode.
☆ Return Loss: -50 dB Single Mode.

◎Construction:

☆ Fibre Single Mode/Multimode
☆ Cable Type Simplex/Duplex/Breakout
☆ Connector Type ST/SC/FC/SMA905or906/D4/BICONIC/FDDI/MTRJ/LC/E2000/DIN/EC
☆ Ferrule Ceramic/Stainless Steel/Polymer
☆ Jacket PVC/FRPVC/LSZH
☆ Applicable Standard EIA Bellcore Complias

◎Ordering Information

◎Ordering Code

◎Example: AD-11S160F003COR-01
Simplex, ST to ST connector. Multimode, 3 feet long
Ceramic Ferrule, OFNR, Yellow Color
◎AD-A-B-CCCCC-DD-E-FFF-G-HH-II

◎**II** Jacket Color
☆ 01-Yellow; 02-Blue, 03-Green, 04-White
☆ 05-Orange, 06-Purple, 07-Red, 08-Grey

◎**HH** Fire Performance Rating
☆ ON - Normal PVC, OFN grade
☆ OR - FRPVC, OFNR Riser Grade
☆ OP - FEP, OFNP Plenum Grade
☆ FR - FRPVC, to IEC 332-3C
☆ LH - LSOH grade to IEC 754-1, IEC 1034 P1/2

◎**G** Ferrule Type
☆ C - Ceramic, S- Stainless Steel, P- Polymer

◎**FFF** Length
☆ F003 - 3 Feet, F005 -5 Feet, F007 - 7 Feet,
☆ M001 - 1 Meter, M002 -2 Meter, M003 - 3 meter

◎**E** Length Unit
☆ F- Foot , M-Meter

◎**DD** Fibre Type-
☆ 90- Single Mode 9/125 µm
☆ 60- Multimode 62.5/125 µm
☆ 50- Multimode 50/125 µm

◎**CCCCC** Cable Type Family
☆ S1-Simplex, D1-Duplex Zip
☆ D2- Duplex Flat, P1 - 1 Fibre Pigtail
☆ P4 - 4 Fibre Pigtail , P6 - 6 Fibre Pigtail
☆ MTxxx- Tight Buffer Distribution, Fibre Number
☆ Btxxx- Tight Buffer Breakout, Fibre Number

◎**B** Right Connector Type
☆ 1-ST, 2-SC, 3-FC, 4-SMA905/906, 5-D4
☆ 6-BICONIC, 7-FDDI, 8-MTRJ, 9-LC

◎**A** Left Connector Type
☆ 1-ST, 2-SC, 3-FC, 4-SMA905/906, 5-D4
☆ 6-BICONIC, 7-FDDI, 8-MTRJ, 9-LC

[ ][Print this page]

Cabling System Manufacturer and a Cabling Solution Provider

Company Profile | Distribution Policy | Products | Business Partners | Contact | links | link us | FAQ | News | site map | download
Copyright © 1991-2004 Addison Technology Ltd
webmaster@addison-tech.com