|
ADSL Pots Splitter
Feature:
The FA-918 Series is a splitter module that has been
specifically designed to implement the functionality of low pass filter
in POTS over ADSL application at CPE side.Asymmetric Digital Subscriber
Line(ADSL)technology is dedicated, point to point, public network access
technology that allow multiple forms of data,voice, and video to be carried
over twisted-pair copper wire on the local loop between a network service
provider's(NSP'S) central office and the customer site or on local loops
created either intra-building or intra-campus.
1) Best of all,ADSL delivers this high speed performance
over existing copper telephone line all while allowing traditional voice
service to coexist without interruption through POTS low pass filters.
2) The POTS-splitter on the customer premises side consists
of a low pass section(installed in a separated plastic box)
3) The FA-918 integrate low pass filter that block the
high frequency energy from reaching the POTS device and provide isolation
from impedance effects of the POTS device on ADSL.
4) In these filter will also attenuate any wideband impulse noise generated
by the POTS device due to the interruption of loop current(e.g. pulse
dialing or on hook/off hook transfer).
5) Because the POTS splitter connects directly
to the subscriber loop media, it must also provide some protection for
externally induced line hits or faults which could damage any attached
equipment or endanger humans interacting with the installed equipment.
Ordering Information
| Item No |
Description |
AD-FA-918A-JP |
ADSL POTS Splitter(Japan Version) |
AD-FA-918-USA |
ADSL POTS Splitter(USA Version) |
AD-FA-918-EURO |
ADSL POTS Splitter(Europe Version) |
AD-FA-918-GM |
ADSL POTS Splitter(German Version) |
AD-FA-918-UK |
ADSL POTS Splitter (UK Version) |
AD-FA-918-F |
ADSL POTS Splitter (France Version) |
AD-FA-918-SW |
ADSL POTS Splitter (Sweden Version) |
AD-UK-11 |
BT to RJ11 cable assembly |
AD-GM-11 |
TAG to RJ11 cable assembly |
|
|
