EMI Shielded Rack Cabinet

Dustproof Rack Cabinet

EMI Shielded Rack Cabinet

Features

The equipment inside the Shielded Rack will be protected from the outer sources of EMI,and the possible EMI from the internal devices will be blocked by tight sealed structure of the cabinet. The interior Aluminium is chromated.Steel sheet is Zinc Galvanized and coated separately.

Designed on the basis of standard Rack Cabinet.
Steel Door/Acryl Door as option.

Standard components included

EMI Shielded Rack Cabinets
Dustproof Rack Cabinets
Dustproof RackCabinets (Double Door Opening)

Side conductive Gasket inserted along the 4 side groove of the side panel provides tight contact with the body.
Conductive Mesh Filter for both EMI blocking and air filtering.
Door Conductive Gasket provides a tight contact body.
Conductive Rubber can be trimmed by the volume of the cable.
Side Panel Latch(Zinc Die cast)blocks the EMI through the mounting hole.

Dustproof Rack

Features

Honeycomb Air Filter as an option for the EMI Shielded.
Designed on the basis of standard Rack Cabinets.
Dustproof Rack Cabinet is used in the place where are lots of dust, such as production lines to protect the inside equipment.
Steel Door/Acryl Door as option.
Side Elastic Gasket runs along the 4 side of groove on the side panels.
Urethane Air Filter which is washable.
Door Elastic Gasket provides a tight seal of the body.
Urethane Foam.
Rear Door.

Ordering Information

AD-FC-AAA-BCC-DDE-(R)(W)

AAA B76 600mm width 19¢¨For standard communication equipment©
B77 700mm width 19¢¨For network devices with many cables©
B77 700mm width 23¢¨For switching equipment©
BCC ¡A21A type 2165mm B22-B type 2250mm C22C type 2200mm
A19A type 1965mm B20-B type 2050mm C20C type 2000mm
A17A type 1765mm B18-B type 1850mm C18C type 1800mm
A15A type 1565mm B16-B type 1650mm C16C type 1600mm
A13A type 1365mm B14-B type 1450mm C14C type 1400mm
A11A type 1165mm B12-B type 1250mm C12C type 1200mm
A09A type¡ 965mm B10-B type 1050mm C10C type 1000mm
A07A type 715mm B08-B type 800mm C07C type 750mm

DD 90900mm
75750mm
60600mm
E S Type¡¡X½76¨To secure rear wiring space between Panel Mounting Rails And Front Door©
L Type X½146¨To secure rear wiring space between Panel Mounting Rails And Front Door©
X represents the space between the mounting frame and front door.
R-Rear mounted Frame (Strongly recommended for flexibility)
WW1-EMI Shielded
W2-Dustproof

Cabling System Manufacturer and a Cabling Solution Provider