|
| ||
|
||
|
|
|
 |
 |
 |
Features
Impedance matching device which converts a 150 Ohm shielded twisted pair
(IBM Type 1) to a coaxial 93 Ohm signal . Connect a 3270 category "A"
terminal and controller using IBM Type 1, 150 Ohm shielded twisted pair.
( IBM equivalent 6339082 )
Application:
The red balun is used to operate IBM 3270 devices over Type 1 STP cable,
rather than coaxial cable. It provides an impedance match from 150 ohm
balanced cable to 93 ohm unbalanced cable.
Ordering information
| Item No: |
Description |
AD-TRP-RB |
Red balun with single BNC 150 Ohm to 93 Ohm , IBM equivalent# 6339082 |
AD-TRP-RB2 |
Red balun with dual BNC 150 Ohm to 93 Ohm, IBM equivalent# 6339082 |
IBM Data Adapter, 150 ohm to 50 ohm Balun
 |
Features
Impedance matching device which converts a 150 Ohm shielded twisted pair
(IBM Type 1) to a coaxial 50Ohm signal .
Application:
This balun is used to convert an Ethernet 10 Base 2 (50 ohm) thinnet
coaxial cable to 150 Ohm STP Type1 cable. This balun provides an impedance
match from 150 ohm balanced cable to 50 ohm unbalanced cable. This balun
plug directly into the IBM cabling system faceplates or distribution panel.
Ordering information
| Item No: |
Description |
AD-TRP-M50DC |
Data connector to thinnet, 150 ohm to 50 ohm 10 Base 2 Balun |
IBM Data Adapter, 150 ohm to 100 ohm twinaxial Balun
 |
Features
Impedance matching device which converts a 150 Ohm shielded twisted pair
(IBM Type 1) to a coaxial 100Ohm signal
Application:
This balun is used to operate IBM devices supported by IBM 3X and AS
400 over Type 1 STP cable, rather than twinaxial cable. It provides an
impedance match from 150 ohm balanced cable to 100 ohm unbalanced twinaxial
cable.
Ordering information
| Item No: |
Description |
AD-TRP-TBDC |
Data connector to Twinaxial, 150 ohm to 100 ohm Balun |
Cabling System Manufacturer and a Cabling Solution Provider |
|
|