K-type intelligent patch cords can achieve Enhanced Cat6 performance. It has built in 2 pins added on top of the standard 8 pins. The 9th pin and 10th pin are used for patching information management. Built in LED is used to assist the identification of patch cord connection status and to locate the other end of the patch cord connected to the patch panel.
ANSI/EIA/TIA 568-C.2,
ISO/IEC 11801-1:2017
EN50173-1
Construction ：UTP Patch Cord Cable
Material of RJ45 Plug: 50um gold plated contact
Conductor Size ：Stranded bare copper, 7 x 0.20 mm (24 AWG)
Pairs/Cores Construction: 4pairs + 2 cores cabled together,
Insulation ：Solid polyolefin
Cable Jacket: PVC/FRPVC/LSOH
Pair Color Codes ：Blue/white-blue, orange/white-orange, green/white-green, brown/white-brown
Cord length: 2m, 3m, 5m up to 15m for selection
Minimum Insertion Cycles: Over 500 times
Operating Temperature: -20°to 60°C
DC resistance (20 ℃ ): Max 145 Ω / km
Resistance Unbalance: Max 3%
Capacitance: 43 pF /m nominal @ 1Khz
Capacitance Unbalance: 3300 pF/Km max @ 1Khz（ wire to ground）
Characteristic impedance: 100 ± 15 Ω @ 1-100 Mhz
Rated voltage: 30 V
Dielectric strength: 700 VAC / min（ wire to wire）
Propagation Delay ：5.3 ns/100m max @ 1 Mhz ；5.2 ns/100m max @ 10 Mhz ；5.2 ns/100m max @ 100 Mhz
Propagation Delay Skew: 45 ns/100m at @ 1-250 Mhz
Insulation Resistance: 500 MΩ/Km min
Velocity of propagation: 69% nominal
| Part NO. | Description |
| AD-IS-K-CAT6UTP4PM002-XX | K-Type Cat 6 UTP Intelligent Patch Cord, 2M |
| AD-IS-K-CAT6UTP4PM003-XX | K-Type Cat 6 UTP Intelligent Patch Cord, 3M |
| AD-IS-K-CAT6UTP4PM005-XX | K-Type Cat 6 UTP Intelligent Patch Cord, 5M |
| AD-IS-K-CAT6FTP4PM002-XX | K-Type Cat 6 FTP Intelligent Patch Cord, 2M |
| AD-IS-K-CAT6FTP4PM003-XX | K-Type Cat 6 FTP Intelligent Patch Cord, 3M |
| AD-IS-K-CAT6FTP4PM005-XX | K-Type Cat 6 FTP Intelligent Patch Cord, 5M |
